Test
For siliconizing glass surfaces use Thermo Scientific™ Hydrocarbon Soluble Siliconizing Fluid.
Standard Components | 1,7-Dichloro-1,1,3,3,5,5,7,7-Octamethyltetrasiloxane |
---|---|
Product Type | Hydrocarbon Soluble Siliconizing Fluid |
To siliconize glass surfaces use Thermo Scientific™ Water-Soluble Siliconizing Fluid.
Silicone solution SERVA for siliconizing glass and metal in isopropanol Suitable for siliconizing UV quartz cuvettes. Size - 1L Storage Conditions - +15 °C TO +30 °C Catalog Number - 35130.02
NC0655185 PMX 200 FLUID 50CST 1GAL
Blue Silicone Rubber is extremely high tear, high tensile strength, two components, and tin catalyzed RTV silicone rubber. It is designed for casting polyurethane foam, polyester, and epoxy parts. It is a superior product with the following advantages over the RTV silicones.
Properties include extremely high tear strength, low shrinkage, low viscosity, excellent chemical resistance, and excellent shelf aging. The catalyst is color codes. IT also has a long pot life, is nsensitive to inhibition, a variable cure rate, and good dielectric properties.
Blue Silicone Rubber comes as a kit consisting of 1 gal (9 lb) silicone base and 1 pt (1lb) blue catalyst.
SERVA ProteinStain Fluo-R, powder SERVA ProteinStain Fluo-R is a highly sensitive fluorescent dye for detection of proteins in e. g. SDS PAGE, native PAGE or 2D gels. The dye does not interfere with immunodetection. Therefore you can stain your gel with SERVA ProteinStain Fluo-R
Silicon Solution Serva for Siconizing Glass and Metal, 100mL, in isopropanol, Suitable for siliconizing UV quartz cuvettes. Storage Conditions: +15 °C TO +30 °C
Silicone solution SERVA for siliconizing glass and metal in isopropanol Suitable for siliconizing UV quartz cuvettes. Size - 250ML Storage Conditions - +15 °C TO +30 °C Catalog Number - 35130.03
Syltherm 800 heat transfer fluid is also a highly stable, long lasting silicone based product designed for high temperature liquid-phase operation.
NC1441254 PSF-5CST SILICONE FLUID 5GPAIL
Used alone or as part of a compounded formula, DOW Corning 200 Fluid provides a non-carbonizing mould release for rubber, plastics, and metal die castings. Excellent viscosity-temperature characteristics, thermal and chemical stability, shear-breakdown resistance, compressibility, and rubber compatibility make DOW Corning 200 Fluid outstanding for mechanical/ hydraulic uses. Typical uses include hydraulic stabilizers, damping media.
NC1621108 PMX-200 SIL FLUID 1 GALLON
Fluid, Heat Transfer Fluid; Largeoikits; For Syltherm 800; Stable; Largeong lasting silicone based product; For high temp. liquid-phase operation; Temp: of - 40 deg. to 400 deg. C; High temp. stability; Largeo
NC2888561 EMULSION BREAKING SOLUTION
NC1212653 PSF-350CST SILICON FLD 55 GAL