Test
Thermo Scientific™ PETG Single-Use Bottle Assembly System includes a Nalgene Square PETG Bottle, a 53 B ported closure with one vent filter line, and two 1/4-in plugged connection lines
Thermo Scientific™ PETG Single-Use Bottle Assembly System includes a Nalgene Square PETG Bottle, a 38 to 430 mm ported closure with one vent filter line and one 1/8-in plugged connection line.
Thermo Scientific™ Polycarbonate Single-Use Bottle Assembly System includes a Nalgene Square Polycarbonate Bottle, a 53 B ported closure with one vent filter line and two 1/4-in plugged connection lines.
Content And Storage | Store at room temperature. |
---|---|
Through the Closure Dispensing | Yes |
Product Type Specs | Standard Single-Use Bottle Assembly System |
Material | PETG |
Closure Type | Screw Cap |
Sterility | Sterile |
Closure Material | HDPE |
Thermo Scientific™ Polycarbonate (PC) Single-Use Bottle Assembly System includes a Nalgene Square Polycarbonate Bottle, a 38 to 430 mm ported closure with one vent filter line, and one 1/8-in plugged connection line
Content And Storage | Store at room temperature. |
---|---|
Through the Closure Dispensing | Yes |
Product Type Specs | Standard Single-Use Bottle Assembly System |
Material | Polycarbonate |
Closure Type | Screw Cap |
Sterility | Sterile |
Closure Material | HDPE |
A single-use, stirred tank bioreactor designed for the non-GMP cultivation of mammalian cell lines. Its rigid design includes a semi-hemispherical shaped polycarbonate vessel, a multi-port high-density polyethylene (HDPE) headplate, a scoping marine impeller, both open pipe and sintered spargers, weldable C-Flex tubing, and all necessary gas inlet and outlet filters.
ChemRxnHub™ process systems are complete with benchtop stand, overhead stirrer and glassware. Available with the optional manifold connection and heat transfer fluid draining system. The unique design of the ChemRxnHub™ support stand and clamping system allows for quick and easy installation/removal of glassware and fits into most benchtop hoods.
Manufactured from type 1 class a Borosilicate glass. Bottom indent and 3 vertical baffles for optimal mixing. Sidearm cap: 45mm Center cap: 100mm Dimensions: 245" x 135" Flask size: 1l
3L Unjacketed Bio Reactor Vessel. Vessels are constructed of heavy wall tubing and are graduated in 200mL subdivisions with numbers every 1000mL. Like-for-like replacement parts for Applikon Biotechnology and Broadley-James brands of bioreactors. Applikon is a registered trademark of Applikon Biotechnology, Inc. Broadley-James and Broadley-James Corporation are registered trademarks of Broadley-James Corporation.
600mL jacketed pressure reactor, complete with #11 Ace-Thred inlet/outlets, 60mm Ace-Thred 4 neck head, 50mm bottom valved adapter, 100 micron PE & 350 micron PP filter supports, stir shaft, bearing, condenser, addition funnel, clamp & O-rings
NC0197706 45ML REACTION VESSEL DISPOSABL
The ABLE Biott 30 mL Disposable Bioreactor is a single-use bioreactor system for cell culture and microbial fermentation. It has a 30 mL working volume and is made of animal-derived component free (ADCF) materials. The bioreactor features an integrated impeller, integrated sparger, and integrated optical sensors for pH and DO. It is compatible with the ABLE Biott bioreactor controller. The bioreactor is sterile and ready-to-use out of the package. It is designed for process development and optimization in upstream bioprocessing workflows.
1L jacketed filter reactor body with 100mm ID grooved top flange, #80 bottom thread, 100mm IDx180mm depth, with CAPFE O-ring, #11 Ace-Thred inlet/outlet connections, use with 3/8in ID tubing, pressure rated at 35 psi.
2L jacketed filter reactor body with 100mm ID grooved top flange, #80 bottom thread, 130mm IDx180mm depth, with CAPFE O-ring, #11 Ace-Thred inlet/outlet connections, use with 3/8in ID tubing, pressure rated at 35 psi.
6000mL jacketed pressure reactor, complete with #15 Ace-Thred inlet/outlets, 150mm Ace-Thred 6 neck head, 80mm bottom valved adapter, 100 micron PE & 350 micron PP filter supports, stir shaft, bearing, condenser, addition funnel, clamp & O-rings
150mL jacketed filter reactor body with 60mm ID grooved top flange, #50 bottom thread, 60mm IDx75mm depth, with CAPFE O-ring, 28/15 O-ring ball joint inlet/outlet connects, pressure rated at 35 psi.