Test
Accuform™ Standard Traffic Cones are brightly colored to provide visibility under all conditions – indoors and outdoors.
High-visibility Barricade Tapes are a quick, temporary and effective way to surround or section-off hazard areas, danger zones, and construction sites
Material | HDPE |
---|---|
For Use With (Application) | Annual maintenance while helping to protect vehicles and the post from impact damage |
Width (English) | 5.75 in. |
---|---|
Length (Metric) | 106.68 cm |
Length (English) | 42 in. |
Material | HDPE |
Certifications/Compliance | MUTCD |
For Use With (Application) | Used to warn, guide and delineate |
Width (Metric) | 14.6 cm |
Dimensions (L x W) | 42 x 5.75 in. (106.68 x 14.6 cm) |
Diamond Grade™ Conspicuity Markings with kiss-cut increase visibility of large trucks, trailers and other vehicles, especially when the vehicle is turning or crossing roadways.
Width (English) | 2 in. |
---|---|
Length (Metric) | 45.72 m |
Length (English) | 50 yd. |
Certifications/Compliance | DOT Mark, DOT Mark |
Width (Metric) | 50.8 mm |
Adhesive Type | Pressure Sensitive Adhesive |
Diamond Grade™ Roll of alternating 11 in. red and 7 in. white, highly reflective, microprismatic sheeting with pressure sensitive adhesive for easy application to trucks, trailers and large vehicles to enhance visibility and detection distance.
Mineral coated, slip resistant material features a highly durable surface. Low profile design helps reduce tripping hazards.
Length (Metric) | 18.3 m |
---|---|
For Use With (Application) | Light to Heavy Traffic Areas |
Finish | Mineral-coated |
Adhesive Type | Pressure Sensitive Adhesive |
Safety-Walk™ Slip-Resistant Conformable Tapes & Treads are ideal for use on diamond grade safety plates, steps and other irregular surfaces. Mineral coated, slip resistant with aluminum foil backing. Conforms to irregular surfaces and around edges.
Checkers™ General-Purpose Utility Wheel Chock are designed for ground vehicles and manufactured with highly durable, lightweight polyurethane. Ideal for use with over-the-road trucks, trailers, pickups, and utility vehicles.
Color | Hi-Vis Orange |
---|---|
Packaging Quantity | 1 Ea. |
Material | Polyurethane |
Tough-Mark™ Heavy Duty Floor Marking Strips mark specific areas in the workplace. Use to keep employees clear of obstructions and debris, designate storage locations, or to create pathways for safe accessibility.
Thickness | 64.4 mil |
---|---|
Width (English) | 2 in. |
Length (Metric) | 1.2 m |
Length (English) | 48 in. |
Material | Polyethylene |
For Use With (Application) | Workplace Safety |
Width (Metric) | 5.1 cm |
Finish | Matte, Scuff-Resistant |
Dimensions (L x W) | 48 x 2 in. |
Tough-Mark™ Heavy Duty Floor Marking Strips mark specific areas in the workplace. Use to keep employees clear of obstructions and debris, designate storage locations, or to create pathways for safe accessibility.
Thickness | 64.4 mil |
---|---|
Width (English) | 3 in. |
Length (Metric) | 1.2 m |
Length (English) | 48 in. |
Material | Polyethylene |
For Use With (Application) | Workplace Safety |
Width (Metric) | 7.6 cm |
Finish | Matte, Scuff-Resistant |
Dimensions (L x W) | 48 x 3 in. |
Can be used outdoors on poles, barricades, fences, buildings, private roads and off-road vehicles
Accuform™ Barricade Tape temporarily sections-off designated areas quickly and effectively as a reminder to practice social and physical distancing to prevent the spread of the Coronavirus (COVID-19)
Thickness | 3 mil |
---|---|
Material | Polyethylene |
Certifications/Compliance | Z535.5-3.2 |
Adhesive Type | Non-adhesive |
Dimensions (L x W) | 1000 ft. x 3 in. |
Accuform™ Barricade Tape temporarily sections-off designated areas quickly and effectively as a reminder to practice social and physical distancing to prevent the spread of the Coronavirus (COVID-19)
Accuform™ Barricade Tape temporarily sections-off designated areas quickly and effectively as a reminder to practice social and physical distancing to prevent the spread of the Coronavirus (COVID-19)
Thickness | 3 mil |
---|---|
Material | Polyethylene |
Certifications/Compliance | ANSI Z535.5-3.2 |
Adhesive Type | Non-adhesive |
Dimensions (L x W) | 1000 ft. x 3 in. |