Labconco™ WaterPro™ PS Polishing System

Labconco WaterPro™ PS Polishing System delivers Type I, 18.2 megohm-cm water with TOC less than 10ppb.

Supplier:  Labconco™ 9000561

Catalog No. 90-005-61

Description

• Dispense manually from a valve or with optional dispensing gun
• Dispenses at the rate of 1.8L/min. depending on feedwater flow rate and pressure, and installed purification modules
• Automatic/intermittent recirculation through polishing loop to maintain water quality, minimize bacterial growth and reduce rinse up time
• LED flashes the actual megohm-cm when water quality falls below set point (water quality alert)

• Corrosion-resistant Type 304 stainless-steel front panel
• Unpigmented virgin natural polypropylene bowls w/o impurities
• Quiet 1/4 hp motor and rotary vane recirculation pump
• Moisture sensor detects leak and signals inlet valve to close and pump to shut down
• Wall mountable

Certifications

ETL listed (115V models); CE marked (230V models).

Specifications

• Certifications/Compliance: CE
• Flow Rate: 1.8 L/min.
• Resistivity: 18.2
• Type: PS Polishing System with Dispensing Gun
• Modules: Installed purification module
• Power Supply: 2.5 A
• Purity: TOC Less than10 ppb
• Width (Metric): 78.9 cm
• Height (Metric): 76.4 cm
• Depth (Metric): 19 cm
• Weight (Metric): 40.8 kg
• Voltage: 230 V

• Feedwater Source: Pretreated Tap
• Product Water Type: Type 1
• Total Organic Carbon: >10
• Model: WaterPro PS
• Plug Type: UK
• Purification Method: Carbon filtration, deionization
• Width (English): 31.1 in.
• Height (English): 30.1 in.
• Depth (English): 7.5 in.
• Weight (English): 90 lb.
• Electrical Requirements: 230 V 50/60 Hz
• Frequency: 50/60 Hz

Safety and Handling

WARNING: Reproductive Harm - www.P65Warnings.ca.gov