Test
Extract basic analytes with a positive charge from aqueous samples
Type | Solid Phase Extraction Column |
---|
Collect effluent from multiple sources while minimizing harmful solvent exhaust
Type | Solvent Waste Kit |
---|
Stir-Pak Mixer Support Stand, 5/8" Dia Shaft; 29" H, Update clamps, mounts, shafts and propellers to accommodate new protocols. Replacement parts keep your overhead mixer running smoothly.
Caframo Pitched blade impeller; 2-1/4" dia (Stainless Steel)
Update clamps, mounts, shafts and propellers to accommodate new protocols. Replacement parts keep your overhead mixer running smoothly.
Replacement parts keep your overhead mixer running smoothlyMust be used with Mixer Motor 55008-08The precision digital controller is used to turn on and set the speed, timer, direction, and torque limits for the mixer motor.
Replacement parts keep your overhead mixer running smoothlyRequires SP (55008-06) or SD (55008-07) Mixer ControllerMotor capabilities are based on the controller. The mixer motor has through-shaft capability and features a user replaceable keyless chuck. Bracket hardware is preinstalled to enable installation of the adjustable tilt mounting bracket.
Axial Flow Impellers (LIGHTNIN A-100) with SUPERPITCH design — 1.5 pitch ratio for greater batch mixing capabilities. Standard axial flow; use for wetting dry powders.
High-shear dispersing impellers create a cutting, tearing action to efficiently shred and disperse solids. Provide low flow with highest shear.
Update clamps, mounts, shafts and propellers to accommodate new protocols. Replacement parts keep your overhead mixer running smoothly.
Accessories improve use of your products and increase efficiency. Spare parts help keep your equipment running smoothly.
Mixer Safety Stand, cast zinc-aluminum base w/ epoxy coating, 304 SS support rod
For mixing of medium viscosity solutions.
These new heavy-duty mixer stands are constructed from heavy gauge steel and square steel tubing to accommodate loads of up to 200 lbs. Use with any of our clamp mount mixers. Stands allow you to easily raise or lower your mixer into drums or tanks up to 48" in diameter. Each stand includes a 12" square base plate with four 9/16" mounting holes for permanent attachment to floors or dollies. Use the manual stand for lighter mixers. Manual stand lets you move mixer up or down in 1" increments; clevis pin holds the mixer in place. The winch stand is ideal for heavier mixers. Raise the mixer to any height; winch holds the mixer in place. Choose the air-powered stand for your heaviest mixers. Air motor holds mixer in place at any level.
Axial Flow Impellers (LIGHTNIN A-100) with SUPERPITCH design — 1.5 pitch ratio for greater batch mixing capabilities. Standard axial flow; use for wetting dry powders.