Chemical Resistant Gloves
Chemical Resistant Gloves
Gloves designed to resist a wide range of chemicals; available in butyl, neoprene, nitrile, PVC, natural rubber, fluoroelastomer, and specialty formulations, lined/unlined, smooth/textured finish; ambidextrous, available in variety of sizes and thicknesses. Regulatory compliance details can be obtained at the individual product level.
The U.S. Occupational Health and Safety Administration (OSHA) standards for personal protective equipment (PPE) address the need for chemical protective safety gloves. PPE is required when hands are exposed to possible skin absorption of harmful substances or chemical or thermal burns.
The OSHA standard also mandates an assessment of chemical exposure and the choice of appropriate gloves based on:
- Dexterity demands
- Length of exposure
- Chemical concentration, temperature, and combinations
- Simultaneous hazards
What Are Chemical Resistant Gloves Used for?
Use chemical resistant gloves for work in chemical plants, transportation, chemical processing, petrochemical and oil refining, de-greasing, solvents, hazardous liquids, and janitorial and maintenance work.
Chemical resistant glove materials and possible applications include:
- Butyl ‒ high-permeation resistance to gas and water vapors; use with esters and ketones
- Neoprene ‒ excellent tensile strength and heat resistance; compatible with some acids and caustics; moderate abrasion resistance
- Nitrile ‒ chemical and abrasion resistance; for general-duty gloves; protects against oils, greases, petroleum products, some acids, and caustics
- PVC (polyvinyl chloride) ‒ resists most acids, fats, petroleum hydrocarbons; abrasion resistant
- PVA™ material (polyvinyl alcohol) ‒ water-soluble; gas-impermeable; resists aromatic and chlorinated solvents
- Viton™ material ‒ resists chlorinated and aromatic solvents; flexible; minimally resists cuts or abrasions
What Are the Best Chemical Resistant Gloves?
No single glove meets the PPE needs for all chemical exposures. Use the manufacturer’s test results to help select the right gloves and check ratings.
Some chemical resistant gloves come lined with cotton for comfort and have other special features. In addition to hand protection, eye protection is important as well. Make sure your facility is equipped with chemical splash goggles, faceshields, eye protection safety signage, and other PPE.
- (65)
- (1)
- (1)
- (31)
- (5)
- (3)
- (1)
- (1)
- (4)
- (3)
- (2)
- (41)
- (4)
- (2)
- (53)
- (2)
- (2)
- (51)
- (3)
- (2)
- (10)
- (8)
- (8)
- (9)
- (2)
- (4)
- (5)
- (37)
- (60)
- (32)
- (124)
- (18)
- (9)
- (6)
- (1)
- (22)
- (16)
- (12)
- (3)
- (12)
- (11)
- (70)
- (52)
- (164)
- (2)
- (19)
- (5)
- (6)
- (3)
- (70)
- (222)
- (26)
- (10)
- (9)
- (14)
- (24)
- (4)
- (14)
- (5)
- (11)
- (19)
- (9)
- (4)
- (1)
- (4)
- (3)
- (5)
- (6)
- (4)
- (4)
- (5)
- (2)
- (9)
- (4)
- (6)
- (6)
- (15)
Filtered Search Results
Ansell MICROFLEX™ Dura Flock™ DFK-608 Nitrile Gloves
Thick, flock-lined nitrile gloves keep hands dry and comfortable while offering increased protection for demanding jobs.
Chlorinated | No |
---|---|
Length (Metric) | 27 cm |
Finger Thickness (English) | 11 mil |
Color | Green |
Length (English) | 10.6 in. |
Material | Nitrile |
Hand | Ambidextrous |
Finger Thickness (Metric) | 0.28 mm |
Thickness (Metric) | 0.28 mm |
Series | MICROFLEX™ Dura Flock™ DFK-608 |
Certifications/Compliance (Europe) | EN 420:2003 + A1:2009 |
Thickness (English) | 11 mil |
Palm Thickness (English) | 8.7 mil |
Latex Free | Yes |
Lining | Lined |
Certifications/Compliance | ASTM D3767,ASTM D5151,ASTM D412,ASTM D573 |
Manufacturing/QMS Audit Standards | ISO 9001:2008 |
Liner Material | Flock |
AQL | 2.5 |
Glove Cuff Style | Rolled |
Palm Thickness (Metric) | 0.22 mm |
Ansell AlphaTec™ Solvex™ 37-676 Nitrile Chemical Resistant Gloves
Nitrile gloves deliver optimal results in wet or dry work environments where chemical resistance is crucial.
Chlorinated | Yes |
---|---|
Grip Design | Reversed Lozenge |
Length (Metric) | 33 cm |
EN 421 | No |
EN388 Standard | EN 388:4101X, EN 388:4101 |
Color | Green |
Length (English) | 13 in. |
Material | Nitrile |
For Use With (Application) | Chemical plants and transportation, chemical processing, Oil refining and Petrochemicals, cleaning and de-greasing, exposure to chemicals, Solvents, hazardous liquids, PVC cements or standing Water, janitorial and maintenance work |
Thickness (Metric) | 0.38 mm |
Series | AlphaTec™ Solvex™ 37-676 |
EN ISO 374-1 | Type A |
ANSI Abrasion Rating | ANSI 5 |
Certifications/Compliance (Europe) | EN 1149 |
EN ISO 374-1 CHEMICAL LETTER CODES | JKLOPT |
EN ISO 374 - 5 | Bacteria, Fungi only |
Thickness (English) | 15 mil |
Latex Free | Yes |
Lining | Lined |
Certifications/Compliance | FDA 21 CFR 177.2600 |
Liner Material | Cotton Flock |
Glove Cuff Style | Gauntlet |
Ansell AlphaTec™ 38-514 Chemical Resistant Butyl Gloves
Thin butyl glove provides resistance to aggressive chemicals including solvents and strong acids.
Grip Design | Rough |
---|---|
Length (Metric) | 35.5 cm |
EN388 Standard | EN 388:1000X, EN 388:1000 |
Color | Black |
Length (English) | 14 in. |
Material | Butyl |
Thickness (Metric) | 0.35 mm |
EN ISO 374-1 | Type A |
ANSI Abrasion Rating | ANSI 3 |
Certifications/Compliance (Europe) | CE 0493, EN 1149, EN 16350, EN 420:2003 + A1:2009; Category III |
EN ISO 374-1 CHEMICAL LETTER CODES | ABCIKMPST |
EN ISO 374 - 5 | Bacteria, Fungi only |
Thickness (English) | 14 mil |
Latex Free | Yes |
Lining | Unlined |
Glove Cuff Style | Beaded |
Ansell MICROFLEX™ 93-260 Polychloroprene Chemical Resistant Gloves
Greener Choice
Offers one or more environmental benefits itemized in the U.S. FTC Green Guides.
Learn More
Offers one or more environmental benefits itemized in the U.S. FTC Green Guides.
Learn More
Thin chemical resistant disposable glove features enhanced tactility and dexterity. Ideal for aerospace, automotive, life science and chemical industries.
Chlorinated | No |
---|---|
Length (Metric) | 30 cm |
EN 421 | Yes |
EN388 Standard | EN 388:2003, EN 388:2016 |
Color | Green |
Length (English) | 11.8 in. |
Material | Neoprene,Nitrile |
Thickness (Metric) | 0.20 mm |
Series | MICROFLEX™ 93-260 |
EN ISO 374-1 | Type A |
Certifications/Compliance (Europe) | Category III, EAC TP TC 019:2011, EN 420:2003 + A1:2009 |
EN ISO 374-1 CHEMICAL LETTER CODES | JKLOPST |
EN ISO 374 - 5 | Bacteria, Fungi WITH Virus Protection |
Thickness (English) | 7.9 mil |
Latex Free | Yes |
Lining | Unlined |
Certifications/Compliance | FDA 21 CFR 177.2600,ASTM D6978-05,ASTM F1671 |
Manufacturing/QMS Audit Standards | ISO 9001 |
AQL | 0.65 |
Ansell TouchNTuff™ 92-605 Disposable Chemical Resistant Nitrile Gloves
Greener Choice
Offers one or more environmental benefits itemized in the U.S. FTC Green Guides.
Learn More
Offers one or more environmental benefits itemized in the U.S. FTC Green Guides.
Learn More
Disposable, nitrile gloves with extended cuff features splash protection against hazardous chemicals.
Disposable | Single-use |
---|---|
Chlorinated | Yes |
EN ISO 374-1 | Type B |
EN 421 | Yes |
Palm Thickness (English) | 4.7 mil |
Finger Thickness (English) | 6.2 mil |
Color | Green |
Latex Free | Yes |
AQL | 1.5 |
Glove Cuff Style | Beaded/Rolled |
Finger Thickness (Metric) | 0.16 mm |
Palm Thickness (Metric) | 0.12 mm |
Ansell MICROFLEX™ NeoTouch™ 25-201 Neoprene Gloves
Greener Choice
Offers one or more environmental benefits itemized in the U.S. FTC Green Guides.
Learn More
Offers one or more environmental benefits itemized in the U.S. FTC Green Guides.
Learn More
Neoprene gloves with an extended cuff offers expanded chemical splash protection over the wrist and forearm.
Length (Metric) | 29 cm |
---|---|
Applications | Laboratory |
Finger Thickness (English) | 6.3 mil |
Color | Green |
Length (English) | 11.5 in. |
Material | Neoprene |
Powdered | Powder Free |
Finger Thickness (Metric) | 0.16 mm |
Thickness (Metric) | 0.16 mm |
Series | MICROFLEX™ NeoTouch™ 25-201 |
Certifications/Compliance (Europe) | EN 374-1:2016, EN 374-5:2016, EN 420:2003 + A1:2009 |
Thickness (English) | 6.3 mil |
Palm Thickness (English) | 5.1 mil |
Exterior Finish | Partially Textured |
Certifications/Compliance | ASTM D6977,FDA 21 CFR 177-2600 |
AQL | 1.5 |
Palm Thickness (Metric) | 0.13 mm |
Ansell TouchNTuff™ 92-600 Disposable Chemical Resistant Nitrile Gloves
Greener Choice
Offers one or more environmental benefits itemized in the U.S. FTC Green Guides.
Learn More
Offers one or more environmental benefits itemized in the U.S. FTC Green Guides.
Learn More
Soft nitrile disposable gloves provide high levels of comfort and splash resistance against hazardous chemicals.
Disposable | Single-use |
---|---|
Chlorinated | No |
Length (Metric) | 24 cm |
EN 421 | No |
Finger Thickness (English) | 5.5 mil |
Color | Green |
Length (English) | 9.5 in. |
Material | Nitrile |
Hand | Ambidextrous |
Finger Thickness (Metric) | 0.14 mm |
Thickness (Metric) | 0.14 mm |
Series | TouchNTuff™ 92-600 |
EN ISO 374-1 | Type B |
Certifications/Compliance (Europe) | Category III, EN 420:2003 + A1:2009 |
EN ISO 374-1 CHEMICAL LETTER CODES | JKPT |
EN ISO 374 - 5 | Bacteria, Fungi WITH Virus Protection |
Thickness (English) | 5.5 mil |
Palm Thickness (English) | 4.7 mil |
Latex Free | Yes |
Lining | Unlined |
Certifications/Compliance | ASTM D6319,FDA 21 CFR 177.2600,ASTM F1671 |
Manufacturing/QMS Audit Standards | ISO 9001 |
Glove Cuff Style | Beaded/Rolled |
Palm Thickness (Metric) | 0.12 mm |
Ansell AlphaTec™ 58-735 Nitrile Chemical/Cut Resistant Gloves
Nitrile gloves offer both chemical and cut protection and can be used in a wide variety of industries. ANSELL GRIP™ Technology provides enhanced dexterity, grip and comfort while INTERCEPT™ Cut Resistant Technology provides protection against lacerations.
Disposable | Reusable |
---|---|
Chlorinated | No |
Grip Design | ANSELL GRIP™ Technology |
Length (Metric) | 35 cm |
EN 421 | No |
EN388 Standard | EN 388:3432, EN 388:4X32C |
Color | Green |
Length (English) | 13.7 in |
Material | Nitrile |
For Use With (Application) | Handling metal sheets and panels, Handling parts with sharp, rough edges, Filling, blending and charging of raw materials, Sample taking and processing, Removal of broken glassware, Spill or leakage cleanup, Assembling and mounting components, Mixing or loading chemicals, Cleaning of plant and machines, Handling application and cleaning tools |
Hand | Specific |
Thickness (Metric) | 1 mm |
Series | AlphaTec™ 58-735 |
EN ISO 374-1 | Type A |
ANSI Abrasion Rating | ANSI 6 |
Certifications/Compliance (Europe) | CE 0493, EN 420:2003 + A1:2009, Category III, EN407, EN 1149 |
EN ISO 374-1 CHEMICAL LETTER CODES | AJKLMNOPT |
EN ISO 374 - 5 | Bacteria, Fungi only |
Thickness (English) | 39 mil |
Latex Free | Yes |
Lining | Unlined |
Certifications/Compliance | 21 CFR 170-199 |
Glove Cuff Style | Extended |
Ansell AlphaTec™ 58-435 Heavy Duty Nitrile Gloves
Heavy-duty nitrile gloves with ANSELL GRIP™ technology features a 16 mil shell effective against hydrocarbon derivatives, alcohol bases, many solvents and esters.
Chlorinated | No |
---|---|
Grip Design | ANSELL GRIP™ Technology |
Length (Metric) | 38 cm |
EN 421 | No |
EN388 Standard | EN 388 |
Color | Gray |
Length (English) | 15 in. |
Cut Resistance Rating | ANSI A5 |
Material | Nitrile |
Series | AlphaTec™ 58-435 |
EN ISO 374-1 | Type A |
ANSI Abrasion Rating | ANSI 5 |
Certifications/Compliance (Europe) | CE 0493, EN 420:2003 + A1:2009, Category III, EN 1149 |
EN ISO 374-1 CHEMICAL LETTER CODES | AJKLOPT |
EN ISO 374 - 5 | Bacteria, Fungi only |
Latex Free | Yes |
Lining | Lined |
Certifications/Compliance | 21 CFR 170-199 |
Liner Material | Cotton Flock |
Glove Cuff Style | Gauntlet |
Ansell Latex-Nitrile Utility Gloves 57-890
Powder free, reusable general purpose gloves protect from chemicals and harsh materials including acids, oils, disinfectants, detergents and abrasives. Ideal for cleaning.
Chlorinated | No |
---|---|
Grip Design | Diamond Embossed |
Length (Metric) | 33 cm |
EN 421 | Yes |
Color | Blue |
Length (English) | 13 in. |
Material | Latex,Nitrile |
For Use With (Application) | General purpose and cleaning |
Thickness (Metric) | 0.16 mm |
Series | Utility 57-890 |
Certifications/Compliance (Europe) | Category III, EN 420:2003 + A1:2009, EN ISO 374:2016-1 |
EN ISO 374 - 5 | Bacteria, Fungi WITH Virus Protection |
Thickness (English) | 6.3 mil |
Latex Free | No |
Lining | Unlined |
Certifications/Compliance | ASTM D6319,ASTM F1671 |
Manufacturing/QMS Audit Standards | ISO 10993-10:2002, ISO 9001, ISO 11193-1:2008, ISO 13485 |
Glove Cuff Style | Elasticated |
Ansell TouchNTuff™ 92-605 Extended Cuff Nitrile Glove
Disposable, chemical resistant nitrile gloves are fingertip textured for splash resistance against a wide range of hazardous chemicals.
Chlorinated | No |
---|---|
Grip Design | Rough |
EN 421 | Yes |
Color | Green |
Material | Nitrile |
Thickness (Metric) | 0.12 mm |
Series | TouchNTuff™ 92-605 |
EN ISO 374-1 | Type B |
Certifications/Compliance (Europe) | EN 420:2003 + A1:2009, Category lll |
EN ISO 374-1 CHEMICAL LETTER CODES | Type B |
EN ISO 374 - 5 | Bacteria, Fungi WITH Virus Protection |
Thickness (English) | 4.7 mil |
Latex Free | Yes |
Exterior Finish | Rough |
Certifications/Compliance | FDA 21 CFR 177.2600,ASTM D6319 |
Glove Cuff Style | Extended |
Ansell AlphaTec™ 23-201 Long Sleeve PVC Glove
Long sleeve 24 in. PVC glove offers good dexterity and pliability, even at low temperatures. Dipped rough finish makes handling wet and slippery materials easier and safer.
Grip Design | Sandblast |
---|---|
Length (Metric) | 62 cm |
EN388 Standard | EN388:3121B, EN388:4121 |
Color | Blue |
Length (English) | 24 in. |
Material | PVC |
Thickness (Metric) | 1.60 mm |
EN ISO 374-1 | Type B |
Certifications/Compliance (Europe) | EU Food Handling, EN 420:2003 + A1:2009; Category lll; REACH Compliant |
EN ISO 374-1 CHEMICAL LETTER CODES | KLT |
EN ISO 374 - 5 | Bacteria, Fungi WITH Virus Protection |
Thickness (English) | 63 mil |
Latex Free | Yes |
Certifications/Compliance | FDA |
Glove Cuff Style | Attached Sleeve |
Ansell AlphaTec™ 38001PP Medium Duty Chemical-resistant Gloves with Gauntlet Cuff
AlphaTec™ 38001PP Medium Duty Chemical-resistant Gloves with Gauntlet Cuff are made of water-based butyl and boast a raised diamond grip for precise industrial applications.
Thickness (Metric) | 0.35 mm |
---|---|
Applications | Industrial |
Thickness (English) | 14 mil |
Color | Black |
Length (English) | 14 in. |
Latex Free | Yes |
Material | Butyl |
Glove Cuff Style | Gauntlet |
Ansell AlphaTec™ 88-390T Latex/Neoprene Chemical Resistant Gloves
Ultra-thin natural rubber and neoprene blend gloves offer tactility and dexterity. Ideal for applications involving intricate parts, laboratory tasks and pharmaceuticals.
Ansell AlphaTec™ 58-201 Green Nitrile Gloves
Greener Choice
Offers one or more environmental benefits itemized in the U.S. FTC Green Guides.
Learn More
Offers one or more environmental benefits itemized in the U.S. FTC Green Guides.
Learn More
Utilizing a unique formulation, AlphaTec 58-201 is a truly versatile protective solution that can be applied to a wide range of applications and environments.
Grip Design | Ansell Grip™ Technology |
---|---|
ANSI Abrasion Rating | ANSI 5 |
Length (Metric) | 330 mm |
Color | Green |
Latex Free | Yes |
Material | Acrylic, Nitrile |
Certifications/Compliance | ANSI ABR 5, ANSI Cut A2, CE 0493, EN 388:2016 +A1:2018, EN 374:2003, EN 388:2003, EN407:2020 , EN 511:2006, Food Contact |
Liner Material | Acrylic |
Glove Cuff Style | Gauntlet |