Classroom Fume Hoods

Labconco™ Coated Steel Blower <img src=

Labconco™ Coated Steel Blower Products for Science Education

For low to moderately corrosive applications. Labconco™ Coated Steel Blower specifically designed to meet the demanding day-to-day ventilation requirements for wide range of hood choices.

Labconco™ 5 ft. Protector ClassMate Laboratory Hood <img src=

Labconco™ 5 ft. Protector ClassMate Laboratory Hood Products for Science Education

Designed to meet the needs of instructional laboratories. Labconco 5 ft. Protector ClassMate Laboratory Hood is a fully-featured benchtop hood with clear back and sides for enhanced visibility for conducting demonstrations or observing students.

Labconco™ Protector™ Premier™ Laboratory Hoods <img src=

Labconco™ Protector™ Premier™ Laboratory Hoods Products for Science Education

Low velocity, high performance fume hoods suitable for general chemistry applications

Labconco™ SpillStopper™ Work Surfaces for 5ft. Protector™XStream Hoods <img src=

Labconco™ SpillStopper™ Work Surfaces for 5ft. Protector™XStream Hoods Products for Science Education

SpillStopper Work Surfaces are molded of corrosion-resistant solid epoxy. They are contoured to conform to the interior liner of Protector XStream Hoods.

Labconco™ SpillStopper™ Work Surfaces for 4 Ft. Protector™ Premier™ and Protector™ XL Hoods <img src=

Labconco™ SpillStopper™ Work Surfaces for 4 Ft. Protector™ Premier™ and Protector™ XL Hoods Products for Science Education

SpillStopper Work Surfaces are molded of corrosion-resistant solid epoxy. They are contoured to conform to the interior liner of Protector Premier and XL Hoods.

Labconco™ Fume Hood Accessory, SpillStopper™ Work Surface <img src=

Labconco™ Fume Hood Accessory, SpillStopper™ Work Surface Products for Science Education

SpillStopper Work Surface is designed for protecting your Labconco Protector™ Echo Filtered, Airo Filtered or XL Fume Hood from accidental spills.

Labconco™ SpillStopper™ Work Surfaces for 4ft. Protector™XStream Hoods <img src=

Labconco™ SpillStopper™ Work Surfaces for 4ft. Protector™XStream Hoods Products for Science Education

SpillStopper Work Surfaces are molded of corrosion-resistant solid epoxy. They are contoured to conform to the interior liner of Protector XStream Hoods.

Labconco™ Protector™ Pass-Through Laboratory Benchtop Fume Hoods: 6 ft. Width <img src=

Labconco™ Protector™ Pass-Through Laboratory Benchtop Fume Hoods: 6 ft. Width Products for Science Education

Offers sashes on two sides allowing operation on either side of fume hood.

Labconco™ Basic™ Laboratory Hoods <img src=

Labconco™ Basic™ Laboratory Hoods Products for Science Education

Basic Laboratory Hoods are designed specifically for laboratories, classrooms and light duty applications where safe ventilation is required. Basic Hoods have smaller overall height and depth than traditional hoods so they fit in areas with low ceilings or narrow aisles.

Labconco™ SpillStopper Work Surface for 5 ft. Protector ClassMate Laboratory Hood <img src=

Labconco™ SpillStopper Work Surface for 5 ft. Protector ClassMate Laboratory Hood Products for Science Education

Designed to protect fume hoods from accidental spills. Labconco SpillStopper Work Surface for 5 ft. Protector ClassMate Laboratory Hood is molded from a special formulation of corrosion-resistant epoxy resins.

Labconco™ Protector™ Pass-Through Laboratory Benchtop Fume Hoods: 5 ft. Width <img src=

Labconco™ Protector™ Pass-Through Laboratory Benchtop Fume Hoods: 5 ft. Width Products for Science Education

Offers sashes on two sides allowing operation on either side of fume hood.

Labconco™ SpillStopper™ Work Surfaces for 8 ft. Protector™XStream Hoods <img src=

Labconco™ SpillStopper™ Work Surfaces for 8 ft. Protector™XStream Hoods Products for Science Education

SpillStopper Work Surfaces are molded of corrosion-resistant solid epoxy. They are contoured to conform to the interior liner of Protector XStream Hoods.

Labconco™ PVC Motor Blower <img src=

Labconco™ PVC Motor Blower Products for Science Education

Labconco™ PVC Blower provide optimum chemical resistance and are made specifically to handle high order oxidizers such as perchloric acid.

Labconco™ 6 ft. Protector ClassMate Laboratory Hood <img src=

Labconco™ 6 ft. Protector ClassMate Laboratory Hood Products for Science Education

Designed to meet the needs of instructional laboratories. Labconco 6 ft. Protector ClassMate Laboratory Hood is a fully-featured benchtop hood with clear back and sides for enhanced visibility for conducting demonstrations or observing students.

Labconco™ Protector™ Pass-Through Laboratory Benchtop Fume Hoods: 4 ft. Width <img src=

Labconco™ Protector™ Pass-Through Laboratory Benchtop Fume Hoods: 4 ft. Width Products for Science Education

Offers sashes on two sides allowing operation on either side of fume hood.

Labconco™ SpillStopper™ Work Surfaces for 8 Ft. Protector™Premier™and Protector™XL Hoods <img src=

Labconco™ SpillStopper™ Work Surfaces for 8 Ft. Protector™Premier™and Protector™XL Hoods Products for Science Education

SpillStopper Work Surfaces are molded of corrosion-resistant solid epoxy. They are contoured to conform to the interior liner of Protector Premier and XL Hoods.

Labconco™ SpillStopper Work Surface for 4 ft. Protector ClassMate Laboratory Hood <img src=

Labconco™ SpillStopper Work Surface for 4 ft. Protector ClassMate Laboratory Hood Products for Science Education

Designed to protect fume hoods from accidental spills. Labconco SpillStopper Work Surface for 4 ft. Protector ClassMate Laboratory Hood is molded from a special formulation of corrosion-resistant epoxy resins.

Labconco™ SpillStopper™ Work Surfaces for 5 Ft. Protector™ Premier™ and Protector™ XL Hoods <img src=

Labconco™ SpillStopper™ Work Surfaces for 5 Ft. Protector™ Premier™ and Protector™ XL Hoods Products for Science Education

SpillStopper Work Surfaces are molded of corrosion-resistant solid epoxy. They are contoured to conform to the interior liner of Protector Premier and XL Hoods.

Labconco™ SpillStopper™ Work Surfaces for 6 Ft. Protector™ Premier™ and Protector™ XL Hoods <img src=

Labconco™ SpillStopper™ Work Surfaces for 6 Ft. Protector™ Premier™ and Protector™ XL Hoods Products for Science Education

SpillStopper Work Surfaces are molded of corrosion-resistant solid epoxy. They are contoured to conform to the interior liner of Protector Premier and XL Hoods.

Labconco™ Protector™ Filtered Fume Hood Accessory, RFID User Authorization Card <img src=

Labconco™ Protector™ Filtered Fume Hood Accessory, RFID User Authorization Card Products for Science Education

For use with Protector Echo and Airo Filtered Fume Hood. Labconco™ Protector™ Filtered Fume Hood Accessory, RFID User Authorization Card are required for use and maintenance providing additional safety and data/usage records.

Labconco™ Protector™ Demonstration Hood <img src=

Labconco™ Protector™ Demonstration Hood Products for Science Education

Low-profile, light-duty fume hoods provide close observation of procedures. Labconco™ Protector™ Demonstration Hood designed to provide 360° of close observation of procedures during educational demonstrations.

Labconco™ Protector™ XStream™ Fume Hoods <img src=

Labconco™ Protector™ XStream™ Fume Hoods Products for Science Education

Offering unsurpassed containment of chemical fumes and vapors while conserving energy when operated at velocities as low as 60 fpm.  

Labconco™ SpillStopper Work Surface for 6 ft. Protector ClassMate Laboratory Hood <img src=

Labconco™ SpillStopper Work Surface for 6 ft. Protector ClassMate Laboratory Hood Products for Science Education

Designed to protect fume hoods from accidental spills. Labconco SpillStopper Work Surface for 6 ft. Protector ClassMate Laboratory Hood is molded from a special formulation of corrosion-resistant epoxy resins.

Labconco™ SpillStopper™ Work Surfaces for 6ft. Protector™XStream Hoods <img src=

Labconco™ SpillStopper™ Work Surfaces for 6ft. Protector™XStream Hoods Products for Science Education

SpillStopper Work Surfaces are molded of corrosion-resistant solid epoxy. They are contoured to conform to the interior liner of Protector XStream Hoods.

Labconco™ 4 ft. Protector ClassMate Laboratory Hood <img src=

Labconco™ 4 ft. Protector ClassMate Laboratory Hood Products for Science Education

Designed to meet the needs of instructional laboratories. Labconco 4 ft. Protector ClassMate Laboratory Hood is a fully-featured benchtop hood with clear back and sides for enhanced visibility for conducting demonstrations or observing students.

Labconco™ Protector™ Filtered Fume Hood Accessory, Roughing Prefilter <img src=

Labconco™ Protector™ Filtered Fume Hood Accessory, Roughing Prefilter Products for Science Education

For use with Protector™ Echo™ and Airo™ Filtered Fume Hoods. Labconco™ Protector™ Filtered Fume Hood Accessory, Roughing Prefilter removes large particles to extend filter life.

Labconco™ FilterMate™ Portable Exhausters <img src=

Labconco™ FilterMate™ Portable Exhausters Products for Science Education

The FilterMate uses HEPA filter, carbon filter or combination of both filters to remove hazardous powders, particulates or vapors from exhaust air stream and return filtered air to environment.

  spinner