Test
Extraction cup for use with the SER158/3 Solvent Extractor.
This three position solvent extractor is a safe and convenient semi-automated extraction system suitable for fat extraction and sample preparation in a wide range of applications in food, feed and other industrial segments.
500mL Flask Only, with Clamps
Complete liquid-liquid extraction apparatus for use with lighter or heavier than water extracting solvents. Overflow and boil-up tube uses Ace-Thred connections allowing easy removal for cleaning, reducing cross-contamination among samples.
Extraction Apparatus, Soxhlet, Large, 55/50, 24/40. Similar to CG-1368, but supplied with a round bottom instead of a flat bottom flask. All specifications are the same as CG-1368.
The Gregar Extractor† is the first major advance in laboratory extractor design in over 100 years. Developed by Joseph Gregar and Ken Anderson of Argonne National Laboratories, this extractor is the only unit on the market that can perform all three common types of extraction. During solid extractions the extractor operates upon the principle of continuous solvent displacement, permitting the sample to be immersed in solvent at all times, thereby increasing the efficiency of the solid-solvent interactions. The design eliminates packing and/or channeling of solid samples normally associated with common soxhlet extractors.Complete extractor is supplied with extractor body, cold finger condenser, extra coarse extraction thimble, and solvent guide. The CG150617, 24/40 250mL round bottom flask and auxiliary condenser (CG1213 or CG1218A) are sold separately.U.S. Patent Number D413678†Designed and developed by Joseph Gregar and Ken Anderson of Argonne National Laboratories
Extraction Siphon, ASTM,30 x 70mm
Distilling Column, Snyder. Number of Sections: 6; Overall Length: 475mm; Joint Size: 24/40. Designed For rapid Solvent evaporation while retaining a high percentage of solute. Used as a component in Kuderna-Danish evaporative concentrators.
Flask, Fat Extraction, AOAC. Capacity: 110mL; Body OD: 35mm; Stopper Size: no. 1. For the extraction of fat from milk products. Reference AOAC 989.05. Supplied w/out stopper.
Extraction Thimble, Glass, Large, X-Coarse Frit, 45mm OD X 130mm Height. All glass extraction thimble permits viewing during extraction process and subsequent weighing. Sizes correspond to CG-1368 or CG-1369 extractor.
Extraction Apparatus, Soxhlet, Small, 34/45, 24/40. Soxhlet type extraction apparatus used for continuous extraction of solids with a suitable solvent. Extractor uses paper or CG-1372 glass thimbles. Condenser has an enlarged uptake tube to improve condensing capacity. Complete apparatus consists of an Allihn condenser, extractor and flat bottom flask.
Large extractor. Part of the CG1368 series. Extractor uses paper or CG-1372 glass thimbles.
1L outer extraction chamber designed for the extracting of liquids with ether. The dispersion of the ether is accomplished with the use of a 70-100micron porosity ACE fritted disc, which is attached to the base of the funnel tube.
50/50 EXTRACTOR
2L outer extraction chamber designed for the extracting of liquids with ether. The dispersion of the ether is accomplished with the use of a 70-100micron porosity ACE fritted disc, which is attached to the base of the funnel tube.