Test
Perform virtually any electrochemistry analysis with these conductivity standards, solutions and accessories.
For use with Seven2Go Conductivity meters.
For use with Seven2Go Pro Conductivity meters.
Conductivity Probe Storage Solution is ideal for storing and conditioning your conductivity cells. It preserves the probe's cleanliness, allows immediate use, and reduces contamination that can occur with storing probe in water only.
NC1977629 CONDUCTIVITY STANDARD
Intellical™ CDC401 is a digital, graphite, 4-pole conductivity cell with a temperature sensor. This Rugged CDC401 version is built with a stainless steel body ensuring sufficient weight to the probe for an easy outside handling, the sensing part is protected by a shroud, and the connection is ensured by strong and visible yellow coloured cable onto which you can clip depth markers (optional accessories), making the CDC401 rugged models specially designed for field use. CDC401 Rugged is available with a 5, 10, 15, or 30 meters cable. The CDC401 Rugged is ideal for measuring electrical conductivity, salinity, resistivity, or total dissolved solids (TDS) in all types of external environment such as river, surface and ground waters, ponds, lakes, sea, wastewater plant, source water, drinking water reservoir for water quality, environmental and treatment process purposes.
The Radiometer CDC741T is a 2-pole conductivity cell with platinized, platinum sensor (k = 1.0 cm-1), glass body and integrated temperature sensor. The CDC741T sensor's 2 platinum plate design is ideal for use with a sample changer due to easy rinsing. The cell has a fixed cable with MAB6 plug for use with Radiometer Analytical CDM210/230/92 conductivity meters. Please reference article no. E61M023 for a version of the CDC741T with RJ45 plug, compatible for use with Hach sensION+ benchtop conductivity meters.
These 10-foot cables with stripped ends are economical replacements for a variety of controllers. There are flow-through, in-line, swage, and dip styles available.
These 10-foot cables with stripped ends are economical replacements for a variety of controllers. There are flow-through, in-line, swage, and dip styles available.
Epoxy Body, Platinum Electrodes Conductivity Cell for Oakton Conductivity and TDS Meters, K=10, 2.5' cable
Oakton Conductivity/TDS/Temp Probe, for Con 100, 200 and 500 Meters, If your conductivity measurements are off, you might need a new cell, sensor, or calibration kit. Update, upgrade, or replace to get the best out of your Oakton conductivity, resistivity, or TDS meter.
Past, Carbon; For sue with working electrode MF-1004 Dual 3mm Carbon paste electrode; 1 gram
NC2051301 M300 TO UNICOND ISM 10FT CABLE