Cleanroom Gloves
Cleanroom Gloves
Cleanroom gloves are intended for use in cleanrooms and controlled environments, including, but not limited to, microelectronic, semiconductor, biotechnology, pharmaceutical, medical device, laboratory, research, chemical, life sciences, and healthcare. Designed to prevent particulate contamination, cleanroom gloves are manufactured, washed, and packaged in a cleanroom environment and meet stringent industry standards and requirements.
Cleanroom gloves are intended for a single use and are constructed of nitrile, latex, neoprene, polychloroprene, vinyl, or polyisoprene material. They are assigned a class and ISO rating and can be sterile or non-sterile, depending on working conditions. Cleanroom gloves are available in pair-packed, hand-specific, or ambidextrous variations and range from 9 inches to 24 inches in length with 12 inches being the standard length. Sizes range from X-small through 2X-large and are sometimes displayed in numeric form (sizes 5 through 11).
The following criteria must be considered when selecting the appropriate cleanroom gloves:
- Particle count: Refers to the number of particle contaminants that come off the gloves
- Extractable count: Number of elements extracted from the gloves in an immersion test
- Clean class: Gloves are carefully laundered, dried, tested and packaged to ensure the particle count is compatible with the cleanroom environment where they will be used
Regulatory compliance details can be obtained at the individual product level.
Hourglass International™ HandPRO™ 9100 Series Clean Class 100 Nitrile Gloves
HandPRO™ Series 9100 Clean Class 100 Nitrile Gloves are finger-textured, 12 in. white gloves made from accelerator-free and sulfur-free patented LOW DERMA™ technology nitrile, providing hand friendly protection with a noticeably better grip and low endotoxin levels for ISO 5 and up environments.
Hourglass International™ HandPRO™ 9300 Series ULTRA Clean Class 10 Nitrile Gloves
HandPRO™ 9300 ULTRA Clean Class 10 Nitrile Gloves are finger-textured, 12 in. white gloves made from accelerator-free and sulfur-free patented LOW DERMA™ technology nitrile, providing hand friendly protection with a noticeably better grip and low endotoxin levels for ISO 4 and up environments.
Hourglass International™ HandPRO™ 7900 Series Controlled Environment Nitrile Gloves
HandPRO™ 7900 Controlled Environment 12 in. white gloves are made from patented LOW DERMA™ accelerator-free, sulfur-free and ultra-low surfactant nitrile with enhanced strength and a secure wet grip. Double-bagged and suitable for ISO 6 or higher cleanrooms.
Hourglass International™ HandPRO™ 1750 Series Controlled Environment Nitrile Gloves
HandPRO™ 1750 Controlled Environment gloves are made from patented LOW DERMA™ accelerator-free, sulfur-free and ultra-low surfactant nitrile with enhanced strength and a secure wet grip. Double-bagged and suitable for ISO 6 or higher cleanrooms.
Hourglass International™ HandPRO™ 6100 Series Clean Class 100 Nitrile Gloves
HandPRO™ 6100 Clean Class 100/ISO 5 gloves are made from accelerator-free nitrile for reduced risk of type IV chemical allergies. The textured, 16 in. elbow-length gloves don easily and fit securely and comfortably over cleanroom garments without undue binding at the cuff.
Hourglass International™ HandPRO™ 617000 Series 16 in. Sterile Clean Class 100 Nitrile Gloves
HandPRO™ 617000 Sterile 16 in. Clean Class 100 Nitrile gloves are made from accelerator-free nitrile for reduced risk of type IV chemical allergies. The textured, ambidextrous gloves don easily over cleanroom garments and are thermoform packed and CE triple bagged for ISO 5 and higher environments.